FOX MACHINERY ASSOCIATES, INC.

Home
SERVICE
PRODUCTS
NEWS & EVENTS
HISTORY
USED MACHINERY
DIRECTIONS
CONTACT FOX
REQUEST INFO
FOX STAFF
TESTIMONIALS
TIPS
CAREERS

DIRECTIONS


FOX MACHINERY

35 W FRONT STREET

BRIDGEPORT, PA 19405

See Map Below

 


MapQuest
FROM:
Address or Intersection:
City:
State: ZIP Code:
Country:

 

FROM I-95 NORTH & SOUTH

Take I-95 To 476 N. Take 476N to Exit 16A (Old exit 6A) (Conshohocken Rt. 23 & Rt. 76E). Bear Left on to Rt. 23 Ramp. At the bottom of the ramp make a right at the light. At the next light make a left on to Rt. 23W. Follow Rt. 23W into Bridgeport. You will come to a stop sign that says do not stop if turning right. Turn right at the stop sign. Go to the 2nd stop light and make a right on to Depot St. At the stop sign make a left on to Front St. Fox will be about 1/16 miles down on your right.
 

FROM PA TURNPIKE -NORTHEAST EXTENSION I-476

Take the PA Turnpike Northeast extension to Mid County Exit #20. Take 476 S to Route 23 and 76 Exit. Bear right onto Rt. 23 ramp. You will come to a light at the bottom of the ramp. Make a right. At the 2nd light (McDonalds on your right) make a left onto Rt. 23 West. Follow Rt. 23 for a couple of miles (You will pass The Inquirer/Daily Times on the right). You will come to an intersection with a stop sign that says you may turn right without stopping. Make a right (You are still on Rt. 23 west). At the 2nd stop light, make a right onto Depot Street. Cross over railroad tracks, then you will come to a stop sign. Make a left onto Front Street. Fox Machinery is about an 1/4 of a mile on the right.

FROM PA TURNPIKE- EAST/WEST

Take the PA Turnpike (276) to Mid County Exit #20. Take 476 S to Route 23 and 76 Exit (Exit #16). Bear right onto Rt. 23 ramp. You will come to a light at the bottom of the ramp. Make a right. At the 2nd light (McDonald’s on your right) make a left onto Rt. 23 West. Follow Rt. 23 for a couple of miles (You will pass The Inquirer/Daily Times on the right). You will come to an intersection with a stop sign that says you may turn right without stopping. Make a right (You are still on Rt. 23 west). At the 2nd stop light, make a right onto Depot Street. Cross over railroad tracks, then you will come to a stop sign. Make a left onto Front Street. Fox Machinery is about a 1/4 of a mile on the right.

FROM 422

Take 422 East towards King of Prussia. Take Route 202 North to King of Prussia. Pass shopping mall on left. Approximately 2 miles after mall, take the DeKalb Street (Bridgeport) exit to the right. (Sign says 202 North.) At traffic light, stay to the left, which is DeKalb Street. Go through flashing yellow light.
Make a right at the next traffic light, which is Fourth Street (at bottom of hill).
At second traffic light make a left onto Depot Street. Cross Railroad tracks and come to stop sign. Turn left onto Front Street. Fox Machinery is 1/4 mile on the right at 35 Front Street.
 

FROM 76 SCHUYLKILL EXPRESSWAY

Take 76 West to exit 332 Conshohocken. Get in to the left hand lane and make a left at the light (Route 23 West). Go approx. 2 miles through 2 traffic lights until you come to a stop sign. Make a right at the stop sign without stopping. At the 2nd traffic light make a right (Depot Street). Go over the railroad tracks and make a left at the stop sign (W. Front Street). Fox is halfway down on the right in between row houses.