Piranha-Whitney 657CNC Combination Machine
Affordable Punching & Plasma Cutting
Features
- Advanced plasma-cutting technology provides highly productive contouring (much faster than laser) with high quality: small kerf angle (vertical cuts), dross-free cutting
- Additional features such as forming (countersinks, tread plate, louvers), drilling and tapping can be added to eliminate additional downstream operations, allowing parts to be completed in a single operation
- Labor costs are lower because it takes significantly less time to manufacture parts
- Faster cycle time – cost of capital per fabricated part is lower because capital costs are amortized over more fabricated parts
- 40 TON PUNCHING CAPACITY – Punch larger hole sizes in a given material type and thickness, in higher tensile strength and thicker materials
- Excellent contour definition (achieved due to a minimized “arc lag”)
- Long consumable life – between 500 and 1200 starts per set of consumables
SPECS
- PUNCHING FORCE: 40 Tons
- MAXIMUM PUNCH SIZE: 5.000″
- PUNCHING HIT RATE: 80 hits per minute
- X-AXIS TRAVEL: 75.50″
- Y-AXIS TRAVEL: 49.20″
- POSITIONING ACCURACY: ±0.005″
- NOMINAL DISTANCE BETWEEN PUNCH & TORCH (X-AXIS): 15.0″
- RAPID SPEED PER AXIS: 1,000 in/min
- PUNCHING STROKE LENGTH: 1.000″
- MAXIMUM WORKPIECE WEIGHT: 500 lb
- MINIMUM WORKPIECE THICKNESS: 0.060″
- MAXIMUM WORKPIECE THICKNESS: 0.500″
- WORK CLAMP OPENING : 0.625″
- MINIMUM WORK CLAMP SPREAD: 6.0″
- MAXIMUM WORK CLAMP SPREAD: 52.0″
- PLASMA CUTTING SYSTEM: Hypertherm HSD130
- PLASMA TORCH HEIGHT CONTROL SYSTEM: Hypertherm Sensor PHC
Included as Standard
- Whitney Positioning / Contouring Control
- 15” (380mm) Touch screen CNC control
- Windows XP operating system
- 32 Gb SSD Hard Drive – available for part program storage
- 15 Mb maximum part program size
- Graphics display
- Integrated parametric shape library
- RJ45 Ethernet connection for networking and remote diagnostics capability
- Punching and Forming
- ‘C’ frame design with open throat
- Electronic stroke control
- Positive stripping
- Pressure switch for forming and marking
- Manual punch and die locking system
- 28XX tooling system
- Slug collection pan
- Integrated Plasma System and Support Equipment
- Hypertherm HSD130 plasma cutting system
- Sensor PHC torch height control
- Water cooled slag chamber
- Dust collector and spark trap
- Hydraulic Work Clamp Assemblies
- (2) work clamps with variable locations
- 1,500 PSDI (6.6 kN) clamping force per clamp
- Replaceable work piece locators
- Programmable Repositioning Assembly
- Hydraulic Power Unit, with 15 hp (11kw) motor and hydraulic oil
- Remote Diagnostics Package
- Software License for all software resident on the CNC Control
